Boiler Installation in Stoke-on-Trent

New boilers supplied and fitted across Staffordshire

Call 07523 286274 Call 07379 625369 Get a Free Quote

New Boilers, Fitted Properly

RC Renovation Ltd installs new boilers across Stoke-on-Trent and Staffordshire, typically from £2,500 to £6,500 depending on the boiler, the property and any pipework or system upgrades. We assess your home, recommend the right boiler, remove the old one, then fit, test and hand over the new system with its paperwork.

A new boiler is one of the biggest jobs in a home, and it is worth getting right. We look at your property, how much hot water you use, how many bathrooms you have and what is already on the wall, then recommend a boiler that suits the way you live rather than the one with the biggest margin.

A straightforward swap can often be finished in a day. If the boiler is moving, the pipework needs upgrading or the system needs new controls, we tell you up front and build that into the quote, so there are no surprises later.

We handle the whole job: disconnecting and removing the old boiler, fitting the new one, upgrading pipework where it is needed, adding a system filter and smart or programmable controls, then testing everything before we leave. We can also balance the radiators so the whole house heats evenly.

New boilers come with the manufacturer's warranty, and we explain exactly what is covered when we quote. We work for landlords and homeowners across Stoke-on-Trent, Newcastle-under-Lyme and the surrounding areas.

PRICE GUIDE £2,500 – £6,500
Includes Supply & install
Warranty Manufacturer backed
BOOKING By appointment
Quotes After a home visit
Coverage Stoke & Staffordshire

Our Work

New white combi boiler installed in a kitchen with boxed-in pipework and a smart thermostat
Baxi 800 combi boiler fitted in a loft with copper pipework and a magnetic system filter
Wide view of a Baxi combi boiler installed on a block wall in a loft
Baxi combi boiler fitted in a cupboard with neat copper pipework and a magnetic dirt separator
Baxi boiler and flue installed in a cupboard during a boiler replacement
Copper pipework and system filter beneath a new Glow-worm boiler
Wide view of a Baxi combi boiler cupboard after installation
Glow-worm Ultimate combi boiler installed in a white cupboard
Glow-worm combi boiler in a cupboard with the door open after installation

Frequently Asked Questions

Boiler Installation FAQs

How much does a new boiler installation cost?

New boilers typically cost £2,500 to £6,500 fitted. The cost depends on the type and size of boiler, the property, the existing heating system, and whether additional pipework or system upgrades are required. We can assess your requirements and provide a clear quotation before any work begins.

How long does a boiler installation take?

A straightforward boiler replacement can often be completed within one day. More complex installations, including system changes, new pipework or relocation of the boiler, may take longer.

Which type of boiler is best for my home?

This depends on your property, hot water requirements, number of bathrooms, available space and existing heating system. We can recommend a suitable boiler based on your individual requirements.

Do I need a new boiler or can my existing boiler be repaired?

Not every boiler needs replacing. If your boiler is repairable and economical to maintain, a repair may be the better option. However, if the boiler is old, inefficient or experiencing repeated faults, replacement may provide better long-term value.

Can you move my boiler to a different location?

Yes, where practical. Boiler relocation may require additional gas, water, heating, electrical and flue work. We will assess the proposed location and explain any additional requirements before installation.

Will you replace the boiler pipework?

Where required, we can upgrade or replace pipework as part of the installation. This helps ensure the new boiler is correctly connected and operates safely and efficiently.

Do you remove the old boiler?

Yes. Where included in the quotation, we will disconnect and remove the existing boiler and dispose of it appropriately.

Do you install the boiler, radiators and heating controls?

Yes. We can provide a complete heating installation, including the boiler, heating controls, radiators and associated pipework where required.

Will my new boiler be tested after installation?

Yes. The boiler and associated heating system will be fully tested on completion. We check operation, heating performance and relevant safety requirements before handing the system back to the customer.

Will you balance the heating system?

Where required, we can balance the heating system to help ensure radiators receive the correct flow and the system operates efficiently.

Can you install smart heating controls?

Yes. Smart and programmable heating controls can be installed where compatible with the boiler and heating system.

Is a boiler installation covered by a warranty?

New boilers normally come with a manufacturer's warranty, subject to the manufacturer's terms and conditions. We will explain the available warranty when providing your quotation.

Are you Gas Safe registered?

Yes. RC Renovation Ltd is Gas Safe registered (number 984795). Gas boiler installation work must be carried out by a suitably qualified Gas Safe registered engineer, and we ensure the gas work is completed in accordance with the applicable safety requirements.

Do you provide a certificate after installation?

Yes. The appropriate installation and compliance documentation will be provided where applicable following completion of the installation.

What happens if my boiler stops working after installation?

If you experience an issue following installation, contact us and we can arrange an inspection. We will determine whether the issue relates to the installation, the boiler manufacturer's warranty or another part of the heating system.

Can you upgrade an old heating system at the same time?

Yes. Depending on the condition of the existing system, we can discuss upgrades such as new radiators, heating controls, pipework improvements, filters and other heating system components.

Do I need to prepare anything before the installation?

We will let you know if anything needs to be moved or cleared before we arrive. We aim to keep disruption to a minimum and leave the working area clean and tidy on completion.

Do you provide boiler installations for landlords?

Yes. We can carry out boiler installation and associated heating work for landlords and rental properties, subject to the requirements of the property and installation.

Do you cover Stoke-on-Trent and surrounding areas?

Yes. RC Renovation Ltd provides boiler installation and heating services across Stoke-on-Trent and surrounding areas, including Newcastle-under-Lyme, Burslem, Hanley, Tunstall, Fenton, Longton, Meir, Trentham, Kidsgrove, Biddulph, Leek, Cheadle, Stone and nearby areas.

How do I arrange a boiler installation quotation?

Contact RC Renovation Ltd to arrange an assessment. We can discuss your current heating system, hot water requirements and preferred boiler location before providing a quotation.